Powerful and musical!! Mistral amplifiers are based on a very musical sophisticated AB design and are available in a wide range of power from 400 from 2800 watts. These amps include a soft start, a signal limiter (which can be switched off) a variable speed low-noise fan and a sophsiticated LED meter display monitors the amplifiers operation status in real time. RMS power: 1 x 1190W @4Ω; 2 x 1130W @4Ω; 2200W @8Ω Bridged ‧Binding post and Neutrik Speakon output connectors ‧Smart-design protection system ‧High-current toroidal transformer ‧Balanced XLR inputs/ parallel outputs ‧Variable speed cooling ‧4 LEDs for operation/protection, limit, power on and clip ‧Dimensions (W×D×H): 480×443×133mm (19"×17.4"×5.2") ‧Weight: 27.51kg (60.65 lb)

The MISTRAL 4000 is a professional power amplifier for all applications requiring superior sound quality, excellent frequency response, high fidelity sound, reduced distortion and low noise power. This rugged amplifier also features two different output modes (stereo and bridged) and a sophisticated protection circuit. The advanced design of the MISTRAL 4000 makes it perfect for critical power amplification needs, where reliability is a must! * Amplifier designed for professional applications. * Adjustable output power. * Sophisticated protection circuits to ensure trouble-free operation. * Input matching allows connection with any pre-amplifier/mixer/crossover. * Excellent frequency response and sound quality. * High fidelity and low noise. * Very low distortion figures (<0,05% SMPTE-IM) * High power (stereo: 2 X 625 @8ohm - 2 X 1000W@4ohm; mono bridge: 2000W@8ohm). * Balanced inputs (XLR and 6.3mm-1/4 sockets) for easier matching. * Output section equipped with Neutrik Speakon and binding posts * Switchable output modes: stereo and bridged. * Continuously variable-speed fan to optimise its speed to amplifier needs. * Switchable lip switch to avoid saturation and/or distortion. * Operation and protection LED: green during regular operation, red when the heat protection is on. * Clip LED and Output limiter LED to give the visual information of amplifier behaviour. * Rugged construction for reliable performances during time. * Rack-mountable (2U). * RMS power: 1 x 855W @4Ω; 2 x 825W @4Ω; 1550W @8Ω Bridged　

The MISTRAL 2500 Professional Power Amplifier is a great choice for applications requiring excellent frequency response, superior sound quality, high fidelity and low noise power. This solid, reliable amplifier also features switchable output power (serial, stereo and bridged) and a sophisticated protection circuit. The advanced design of the MISTRAL2500 makes it perfect for critical power amplification needs. * Amplifier designed for professional applications * Adjustable input sensitivity * High power (stereo: 2 X 460W @8ohm - 2 X 830W @4ohm ; mono bridge: 1400W @ 8ohm). * The sophisticated protection circuits ensure trouble-free operation. * Input matching allows connection with any pre-amplifier/mixer/crossover. * Excellent frequency response and sound quality. * High fidelity and low noise. * Very low distortion figures (<0,05% SMPTE-IM) * Balanced inputs (XLR and 6.3mm-1/4” sockets) for easier matching. * Switchable output: serial, stereo and bridged. * Low noise fan for efficient cooling. When the temperature rises, the fan automatically switches to high-speed. It rotates at normal speed at other times to reduce power consumption and inherent noise. * While on, the Clip Limit function keeps a fixed ouput. When the ouput exceeds the maximum of the amp, this changes to protect its circuits. While off, there is no such limit. * Indicator for the ouput balance, as well as status indicator of SIG and CLIP. When there is a signal, the SIG light is on. If anything abnormal happens to the circuits, the CLIP light will illuminate. * Stylish white aluminum panels with acrylic accents. * Rugged, reliable performances * Rack-mountable * RMS power: 1 x 610W @4Ω; 2 x 600W @4Ω; 1200W @8Ω Bridged　

The MISTRAL 1500 is a professional power amplifier for all applications requiring superior sound quality, excellent frequency response, high fidelity sound, reduced distortion and low noise power. This rugged amplifier also features two different output modes (stereo and bridged) and a sophisticated protection circuit. The advanced design of the MISTRAL1500 makes it perfect for critical power amplification needs, where reliability is a must! * Amplifier designed for professional applications. * Adjustable input sensitivity * Sophisticated protection circuits to ensure trouble-free operation. * Input matching allows connection with any pre-amplifier/mixer/crossover. * Excellent frequency response and sound quality. * High fidelity and low noise. * Very low distortion figures (<0,05% SMPTE-IM) * High power (stereo: 320W@8Ohm - 540W@4ohm mono bridge: 1000W@8ohm). * Balanced inputs: XLR, 6.3mm (1/4" TRS) jack and binding posts for total matching. Parallel XLR outs. * Output section equipped with Neutrik Speakon and binding posts * Switchable output modes: stereo and bridged. * Continuously variable-speed fan to optimise its speed to amplifier needs. * Switchable limiter to avoid saturation and/or distortion. * Operation and protection LED: green during regular operation, red when the heat protection is on. * Clip LED and Output limiter LED to give the visual information of amplifier behaviour. * Rugged construction for reliable performances during time. * Rack-mountable (2U). * Balanced inputs: XLR, 6.3mm (1/4" TRS) jack and binding posts for total matching. Parallel XLR outs. * RMS power: 1 x 420W @4Ω; 2 x 400W @4Ω; 800W @8Ω Bridged　

Also based on Mistral design, MC amplifiers are available in 4 and 8 channels configurations with power ranging from 300 to 800 watt per channel. They include soft start, signal limiter (that can be switched off) a variable speed low-noise fan and an LED meter display which monitors the amplifiers operation status in real time. MC Series amplifiers also include an LED meter for every channel and functions monitored include: Operation, Limiting, Clipping and Protection modes. All Mistral toroidal transformers include an independent secondary rail for better stability and dynamic range. ‧Ultra low-noise and hum ‧DC, infrasonic, thermal overload & short circuit protection ‧Smart indicator for signal, clip, protect, bridge-mono & parallel-input LEDs on front panel ‧Selectable high-pass filters protect speakers and prevent speaker transformer saturation with minimal effect on program material ‧DIP switch control for clip limiter, high-pass filter, bridge-mono selections ‧Variable speed fan for low noise ‧Detachable Euroblock: "Barrier strip" input connectors ‧1 dB dented gain controls for fast and accurate gain settings ‧RMS power: 1 x 220W @4Ω; 8 x 200W @4Ω; 4 x 400 @8Ω Bridged ‧Dimensions (W×D×H): 483×450×89mm (19"×17.7"×3.5") ‧Weight: 21.8kg (48.1 lb)

Also based on Mistral design, MC amplifiers are available in 4 and 8 channels configurations with power ranging from 300 to 800 watt per channel. They include soft start, signal limiter (that can be switched off) a variable speed low-noise fan and an LED meter display which monitors the amplifiers operation status in real time. MC Series amplifiers also include an LED meter for every channel and functions monitored include: Operation, Limiting, Clipping and Protection modes. All Mistral toroidal transformers include an independent secondary rail for better stability and dynamic range. ‧Ultra low-noise and hum ‧DC, infrasonic, thermal overload & short circuit protection ‧Smart indicator for signal, clip, protect, bridge-mono & parallel-input LEDs on front panel ‧Selectable high-pass filters protect speakers and prevent speaker transformer saturation with minimal effect on program material ‧DIP switch control for clip limiter, high-pass filter, bridge-mono selections ‧Variable speed fan for low noise ‧Detachable Euroblock: "Barrier strip" input connectors ‧1 dB dented gain controls for fast and accurate gain settings ‧RMS power: 1 x 680W @4Ω; 4 x 600W @4Ω; 2 x 1200 @8Ω Bridged ‧Dimensions (W×D×H): 483×418×133mm (19"×16.5"×5.2") ‧Weight: 28.2kg (62.2 lb)

Also based on Mistral design, MC amplifiers are available in 4 and 8 channels configurations with power ranging from 300 to 800 watt per channel. They include soft start, signal limiter (that can be switched off) a variable speed low-noise fan and an LED meter display which monitors the amplifiers operation status in real time. MC Series amplifiers also include an LED meter for every channel and functions monitored include: Operation, Limiting, Clipping and Protection modes. All Mistral toroidal transformers include an independent secondary rail for better stability and dynamic range. ‧Ultra low-noise and hum ‧DC, infrasonic, thermal overload & short circuit protection ‧Smart indicator for signal, clip, protect, bridge-mono & parallel-input LEDs on front panel ‧Selectable high-pass filters protect speakers and prevent speaker transformer saturation with minimal effect on program material ‧DIP switch control for clip limiter, high-pass filter, bridge-mono selections ‧Variable speed fan for low noise ‧Detachable Euroblock: "Barrier strip" input connectors ‧1 dB dented gain controls for fast and accurate gain settings ‧RMS power: 1 x 400W @4Ω; 4 x 390W @4Ω; 2 x 780 @8Ω Bridged ‧Dimensions (W×D×H): 483×403×89mm (19"×15.9"×3.5") ‧Weight: 18.9kg (14.7 lb)

The MISTRAL 900 is a professional power amplifier for all applications requiring superior sound quality, excellent frequency response, high fidelity sound, reduced distortion and low noise power. This rugged amplifier also features two different output modes (stereo and bridged) and a sophisticated protection circuit. The advanced design of the MISTRAL 900 makes it perfect for critical power amplification needs, where reliability is a must!

• Amplifier designed for professional applications.
• Adjustable output power.
• Sophisticated protection circuits to ensure trouble-free operation.
• Input matching allows connection with any pre-amplifier/mixer/crossover.
• Excellent frequency response and sound quality.
• High fidelity and low noise.
• Very low distortion figures (<0,05% SMPTE-IM)
• High power (stereo: 190W@8ohm; 300W@4ohm, mono bridge: 600W@8ohm).
• Balanced inputs (XLR and 6.3mm-1/4 sockets) for easier matching.
• Output section equipped with Neutrik Speakon and binding posts
• Switchable output modes: stereo and bridged.
• Continuously variable-speed fan to optimise its speed to amplifier needs.
• Switchable lip switch to avoid saturation and/or distortion.
• Operation and protection LED: green during regular operation, red when the heat protection is on.
• Clip LED and Output limiter LED to give the visual information of amplifier behaviour.
• Rugged construction for reliable performances during time.
• Rack-mountable (2U).

RMS power: 1 x 220W @4Ω; 2 x 190W @4Ω; 385W @8Ω Bridged　

Powerful and musical!! Mistral amplifiers are based on a very musical sophisticated AB design and are available in a wide range of power from 400 from 2800 watts. These amps include a soft start, a signal limiter (which can be switched off) a variable speed low-noise fan and a sophsiticated LED meter display monitors the amplifiers operation status in real time.

RMS power: 1 x 80W @4Ω; 2 x 75W @4Ω; 135W @8Ω Bridged　

‧Neutrik Speakon output connectors

‧Balanced XLR and 1/4" jack inputs

‧3 LEDs for limit, power on and clip

Also based on Mistral design, MC amplifiers are available in 4 and 8 channels configurations with power ranging from 300 to 800 watt per channel. They include soft start, signal limiter (that can be switched off) a variable speed low-noise fan and an LED meter display which monitors the amplifiers operation status in real time. MC Series amplifiers also include an LED meter for every channel and functions monitored include: Operation, Limiting, Clipping and Protection modes. All Mistral toroidal transformers include an independent secondary rail for better stability and dynamic range.

‧Ultra low-noise and hum
‧DC, infrasonic, thermal overload & short circuit protection
‧Smart indicator for signal, clip, protect, bridge-mono 
   & parallel-input LEDs on front panel
‧Selectable high-pass filters protect speakers and prevent speaker 
   transformer saturation with minimal effect on program material
‧DIP switch control for clip limiter, high-pass filter, 
   bridge-mono selections
‧Variable speed fan for low noise
‧Detachable Euroblock: "Barrier strip" input connectors
‧1 dB dented gain controls for fast and accurate gain settings
‧RMS power: 1 x 225W @4Ω; 4 x 200W @4Ω; 2 x 400 @8Ω Bridged
‧Dimensions (W×D×H): 483×403×89mm (19"×15.9"×3.5")
‧Weight: 17.1kg (37.7 lb)